String Layout

Crew
Laying out the stringlines accurately is critical to have a square finished building.   This takes a bit of patience and ability to read a tape measure but can be easily accomplished in a couple of hours with a helper.
String Layout
Step 1.
Set Baseline String
Watch Video Step

The first string line after marking out one side of the building. You will then mark the corners on that side. This is only a close measurement you will only need one stake on each end. You want to set the string to grade with the laser. Using a Sharpie you will mark the exact corners on the string. pull the tape tight.

BASELINE
BASELINE
Step 2.
Set a Parallel Line
Watch Video Step

Set a parallel line which is equal distance from the first line. You might have to adjust the string until it is perfect. An easy
trick to making micro adjustments is to construct a kicker.

PARALLELLINES
PARALLELLINES